MFR-1160 soldering (METCAL) (USA)

MFR-1160 soldering (METCAL)

USA

 MFR-1160 soldering (METCAL)

 The MFR-1100 Single Output Series is highly versatile in that it can be used with either a soldering tip, cartridge or tweezers and offers a choice of four hand-pieces. The MFR-1160 comes with a Cartridge Hand-piece especially designed for Metcal SSC cartridges. This system will allow users of the Metcal SP200 Soldering System to continue to use their Metcal SSC cartridges.

Power Supply:

 

 

 

Ambient Operating Temperature:

10 - 40°C (50°F - 104°F)

Maximum Enclosure Temperature:

55°C (131°F)

Input Line Voltage:

100 - 240 VAC

Input Line Frequency:

50/60 Hz grounded circuit

Power Consumption:

65 Watts maximum

Output Power:

60 Watts maximum

Output Frequency:

450 KHz

Power Cord:

(3-wire) 183 cm 18/3 SJT

Dimensions (approx.) W x D x H:

90mm (3.5”) x 200mm (8”) x 152.5mm (6”)

Weight:

2.3kg (5.05 lbs)

Surface Resistivity:

105-109 Ohms

Certification / Marking:

cTUVus, CE

Hand-piece Cable Length:

L=122cm (48"), burn resistant, ESD safe

  

Handle and Workstand:

 

 

 

Tip-to-Ground Potential:

< 2 mV RMS

Tip-to-Ground Resistance:

< 2 ohms

Idle Temperature Repeatability:

+/- 1.1°C (2°F) in still air

Handle Cord Assembly Length:

122cm - burn proof, ESD safe

Connector 8-pin circular DIN

Workstand W x D x H:

100mm x 200mm x 100mm (4" x 8" x 4")

Workstand Weight:

0.69 kg (1.51 lbs)

 

Bình luận

Products of the same type